The paper cutter mainly uses the method of guillotine, and the cutting direction of the paper is not straight up and down, but obliquely. When working, the motor carries a pulley, the pulley carries an electronic clutch, the clutch carries a knife body, the oil pressure carries an oil cylinder, the oil cylinder carries a lever, and the lever pulls the paper press to press the paper, and then the cutter of the electric paper cutter comes down Cut the paper.
        The uniform pressing of the paper press determines the cutting accuracy. Generally speaking, the greater the pressure of the paper press, the more it can prevent the paper from affecting the cutting accuracy due to deformation. The paper press can be divided into a screw structure, a spring structure and a hydraulic structure. The hydraulic press has a wide range of applications and a high utilization rate, mainly because the pressure is uniform and sufficient, and it can be easily adjusted and controlled.
        The operation of the paper cutter is relatively simple, and the requirements on the environment are not high.
        1. Normally, the machine guide rails, screw rods, and linkage pressers and other important parts should be well lubricated and maintained, and timely repaired to ensure the machine's cutting accuracy.
        2. Correctly adjust the machine to ensure that the paper is cut at right angles. The paper pusher should not only be at 90 ° to the platform, but also parallel to the cutter. The paper press should adjust the working pressure according to the soft and hard conditions of the cut paper, prevent the paper from breaking and displacement, and ensure the cutting quality;
        3. Use the blade correctly to improve the cutting precision of the product. After rough grinding with a blunt blade by an electric knife sharpener, it should also be finely ground with "oil stone" and fine-grained sand cloth to eliminate edge burrs. When cutting, it is advisable to cut dozens of knives with soft paper, such as waste paperboard and offset paper, to break in the edge of the blade, eliminate burrs on the edge of the edge, and prevent the cutting edge of the direct cutting hard paper from cracking. To sum up, correctly understanding and mastering the technical essentials of paper cutting and scientifically and rationally using paper cutting machines can not only reduce or avoid various failures, enhance the service life of the machine, but also improve production efficiency and product quality.
        4. The double button paper cutter requires both buttons to be pressed at the same time, otherwise the cutter motor will not operate, which can guarantee the absolute safety of single-person operation.

        5. The above is a safety factor that affects the use process, so pay attention to the replacement of the blade during maintenance and maintenance, use the knife holder to ensure that the blade edge is closed, not only to ensure the safety of people, but also to ensure that the blade is not damaged.