The paper cutter greatly simplifies our work, but it also carries certain risks. It is best to follow the rules. The following editors will introduce the specific precautions:
        1. The paper cutter must be kept and used by full-time personnel. Without approval, non-local personnel are not allowed to operate it privately.
        2. To work, you must first dress neatly according to production safety requirements and wipe the paper-cutting countertop clean. Make sure that the countertop is dust-free and oil-free, and ensure that the paper is white and flawless.
        3. Before starting to cut paper every day, the photoelectric safety device must be checked once, and only when it is confirmed that its work is reliable, can it be put into formal production.
        4. The cutting table is not allowed to place steel rulers, hand tools, bolts, gaskets and other metal products to avoid major machine accidents.
        5. In order to ensure the quality of the paper cutting, the blade should be changed frequently, and a special blade holder should be used to prevent the knife edge from hurting people. When the blade is replaced, the machine should be cut off.
        6. The replaced knife board to be sharpened must be clamped and fixed by a special wooden board, and the knife edge is not allowed to be exposed around the splint to avoid falling and hurting people.
        7. The paper cutting table should be cleaned every day after work, and then waxed or coated with anti-rust paint.
        8. In case of computer or electrical failure, non-professionals are not allowed to inspect and dismantle without authorization.
        9. Keep the machine well lubricated. Check the oil level of the lubricating oil pump before going to work. Press the handle of the oil pump a few times by hand and fill the lubrication points with grease once a week.
        10. After the work is completed, turn off the main power of the machine before leaving.

        11. It is strictly forbidden to take illegal drugs after drinking.