The paper cutter is an ideal and necessary cutting tool for all kinds of paper, photos, art paper jams, hot and cold mounting paper, etc. It adopts automatic paperweight design. The blade is specially treated to cut sharp and durable, and the products after cutting are neat hair.
       The standard sample cutter is composed of table, upper and lower cutters, positioning baffle, lever pressing plate, scale baffle and so on. Before using it for the first time, remove the screw that fixes the tool at the front of the plastic handle. When in use, first lift the tool, lean the sample against the ruler side of the table top item, push the sample to the positioning baffle, and then hold the tool handle with your right hand to cut it down, you can get the desired test kind. After cutting the paper, press the cutter to the right down to the left bayonet of the positioning baffle to clamp the cutter to the left, and then pull the cutter to the right to raise it up. Note: When the adjacent sides of the sample are not perpendicular to each other, they should be cut into adjacent sides that are perpendicular to each other before cutting the sample.
        The paper cutter should be avoided in wet or dusty environments, and a small amount of lubricating oil should be added to the moving parts every month. If suspended, the upper and lower blades should be coated with a small amount of anti-rust oil to prevent corrosion.
        It is strictly prohibited to cut any metal objects and other high-strength materials to avoid damage to the blade.
        If the incision is uneven, the clamping pressure of the tool can be adjusted appropriately. The specific method is: remove the plastic sleeve at the front of the tool and tighten the nut.
        After the cutting edge is blunt, it can be finely ground with whetstone.

        For cutting paper samples with low basis weight or softness, such as toilet paper, etc., the sample can be sandwiched between two sheets of liner paper and copy paper and copy paper.