1. The position and location of the hydraulic paper cutter are different according to different models. Therefore, please pay attention to safety during the transportation process and need to balance it in a clean environment.
        2. For the use of the power supply, connect the device according to the rated voltage in the manual. If the voltage is too high or too low, it will cause the device to operate abnormally. Therefore, it is recommended to use an AC stabilized power supply when using the hydraulic paper cutter. Improve work quality and efficiency. In addition, use this large equipment to ensure that it has a good grounding socket.
        3. There is also a very important note for the use of power supplies, that is, do not overload the voltage. In order to avoid dangerous accidents such as fire or electricity leakage.
        4. When cleaning the hydraulic paper cutter, set the power off and pull out the power plug.
        5. When using the equipment, do not allow liquid to flow into the interior of the paper cutter to avoid scrapping the paper cutter.
        6. When using a hydraulic paper cutter, children or non-related personnel are prohibited from operating. In addition, under the blade and the knife edge must not be lifted during operation. At the same time, the cutter blade should not be used to cut hard or fragmentable materials.

        7. Under normal use, maintenance of equipment transmission parts should be carried out once a month, which is to increase lubricating oil properly to prolong the service life of equipment.