In recent years, there has been no shortage of news about high-speed slitting machines that have caused casualties. Most of them are caused by the wrong method when operating high-speed slitting machines. The right way.
        1. Turn on the power switch of the hydraulic system of the cutting machine, and check whether the oil level and pressure gauge of the main hydraulic drive system are correct and stable. Again, open the pneumatic shut-off valve of the slitter to check whether the air pressure is correct and stable.
        2. Before using the slitter, you should first eliminate all potential safety hazards in the operation site. At the same time, pay attention to check whether all the data of the slitter are normal, check whether the voltage is normal, and whether the current is normal and stable.
        3. The setting control of the paper tube machine of the slitting machine, and setting the slitting menu according to the film type, thickness, length, width, etc. arranged in the slitting plan. File the corresponding BOPP film file from the PDF. Set the winding length and width of the film with the corresponding specifications. Select the corresponding winding station, adjust the roller arm and roller, and install the paper core of corresponding specifications.
        4. It is the feeding of the paper tube machine of the slitting machine, and it is connected with the film. Finally, the start-up operation and use control of the slitter.

        All in all, when operating the high-speed slitting machine, the operator should go through rigorous knowledge training to get on the job.