The automatic slitting machine is a very important equipment in paper processing, so if there is a failure, the efficiency will be greatly reduced. Let's take a look at the common failures and solutions of the automatic slitting machine.
        1. The trend of slitting and rewinding materials is mainly due to the insufficient winding tension, adjust the appropriate winding tension of the paper slitter, use a pressure roller for winding, and enter the winding after wrapping the slitting material over the pressure roller Paper core.
        2. The winding machine of the slitting machine is uneven. Most of this kind of suffering is due to the unsuitability of the paper core. As long as the paper core that meets the required inner diameter is replaced, in addition, the winding pressure should also be used during the winding process. Roller, this can avoid the problem of uneven winding.
        3. The meter counting is not accurate. If you encounter such a problem, you can touch the double wheel of the metering wheel at the same time to the feeding rubber roller, and make a mark on the metering wheel. .

        After reading the above content, I believe everyone has understood the common faults and solutions of the automatic slitting machine.