Now that the demand for paper bags is large, the natural paper bag machine industry will usher in a peak sales season, but now China's paper bag machine equipment can only produce some simple paper bags, whether in terms of variety, automation, or intelligence There is still a lot of room for improvement, so in what aspects should our current paper bag machine equipment be developed?
        So what is the status of China's paper bag machine equipment? For general paper bag machine equipment, we can basically carry out independent design. The general high-end products, especially some advanced models, are mostly imitating similar foreign models, with domestic design and serial design. The main reasons are firstly that most designers in our country do not have enough mastery of high-end technology, and lack of technical capital investment. The entire industry lacks the strength of macro-control, and the advantageous resources cannot be reasonably placed and adjusted.
        New packaging machinery is often a combination of mechanical, electrical and pneumatic equipment. Making full use of the latest achievements of information products, the use of separate transmission technologies such as pneumatic actuators and servo motor drives can greatly shorten the transmission chain of the entire machine, greatly simplify the structure, and greatly improve work accuracy and speed. One of the key technologies is the synchronous control technology of multi-motor drag. In fact, it is not difficult to master this technology, but some designers do not understand this development trend of packaging machinery. If the design of packaging machinery in our country was imitation and learning, then we should have the consciousness of innovative design.
        As people's expectations for paper bag machine equipment become greater, the degree of automation of the equipment we produce will become higher and higher in order to improve productivity and equipment flexibility and flexibility. Improve production efficiency, reduce production costs, and meet production requirements to the greatest extent. Due to the fierce competition in the market, the cycle of product replacement is getting shorter and shorter. So we need to train our own technical staff, from keeping pace with the market to leading the rapid development of the industry.

        Paper bag machine equipment is a very popular packaging equipment, it can effectively help people to pack goods, and its packaging effect is very good. The quality of the paper bag machine equipment made by different manufacturers is different, and the price is also different. When people choose the paper bag machine equipment, they must choose to buy high quality paper bag machine equipment.
        In view of the current development status of China's paper bag machine industry, China's packaging machinery companies have always been committed to the development and promotion of packaging machinery technology, in order to meet new challenges and competition from international packaging machinery companies. As we all know, with the continuous improvement of the quality of the national economy, the awareness of environmental protection has gradually increased, which can not help but put forward higher requirements for packaging machinery industry enterprises, which is also spurring our enterprises to develop faster.
        While ensuring the quality of packaging equipment, we must also pay more attention to the environmental performance of the equipment. Packaging machinery and equipment that have only pursued efficiency and neglected product quality are no longer recognized by customers. Instead, they will integrate environmental protection, high efficiency, and excellent quality. The integrated new paper bag machine equipment improves the production efficiency of paper bags and reduces production costs.
        Looking at the current development of domestic packaging machinery, the biggest problem in China's packaging machinery industry is the safety of paper bag machines. A variety of packaging machinery brings convenience in the production process and there are many hidden safety hazards. Therefore, improving the functions of packaging machinery and equipment and strengthening the improvement of packaging machinery and equipment technology is one of the primary concerns.
         This is a period of rapid development of the packaging equipment industry. If these problems are not handled properly, they will become legacy problems. It will take more effort to resolve them later. Therefore, we must adapt to the needs of the market and solve various existing problems. Problems to promote the comprehensive development of paper bag machine equipment.

        Paper bag machine equipment is relatively fast when making products. Choosing to use paper bag machine equipment has features such as automation and intelligent functions. However, the development of paper bag machine equipment in the market has encountered some problems, such as relatively low production technology and low competitiveness. Now what I want to introduce to you is what are some of the functions that a paper bag machine needs.
        Now the paper bag machine equipment we use has been freed from manpower, and the speed of making products is relatively fast. Although such equipment can meet the general needs of customers, the packaging situation of products is developing rapidly. If we cannot To better serve customers, in the future, the paper bag machine equipment should highlight the characteristics of intelligence and automation.
        Our industry is relatively late at present, and its rapid development is the main feature of the domestic packaging machinery industry. At present, the industry as a whole has entered a period of product structure adjustment and improvement of innovation capabilities. Some packaging machinery has filled domestic gaps and has basically met the needs of the domestic market. Some products are also exported.
        But overall it is large but not strong, the quality is not high, the independent innovation ability is weak, and the international competitiveness is not strong. Compared with the international advanced level, there is still a large gap. New packaging models with intelligent and automated functions will gradually replace tradition and become the mainstream of the future. This is an effective way for packaging machinery companies to achieve sustainable development, and it is also the ultimate goal of technical reform. This is the direction of our business development.
        Only when the packaging machinery industry in China replaces the traditional model of blind introduction and imitation with technology innovation, close to users, and independent research and development as soon as possible can China's packaging industry and market develop healthily. At the moment when the industry is facing a new round of structural adjustment, technological upgrading, and product replacement, domestic enterprises need to develop enterprises and enhance competitiveness with a pragmatic attitude through independent innovation and deep digestion, in order to become a giant in the packaging machinery industry.
        The equipment of other industries has become very intelligent and automated. Therefore, the characteristics of these modern machines must also have the characteristics of our paper bag machines. We must promote the transformation of the packaging machinery industry to high-end production, especially in the areas of automation control and intelligence. Do more work in the field of chemical industry, and actively launch an impact on the industry's top-notch level.

        The paper bag machine equipment has been used for a long time, and there will be some small problems. When these small problems are encountered, the correct method should be used to deal with them in a timely manner, and the paper bag machine equipment needs to be maintained in daily life. Now what Xiaobian wants to introduce to you is the common faults and solutions of paper bag machine equipment.
       The computer controller of the paper bag machine often has some failures. In order to solve these failures, we need to know the type of the failure and the solution. If it cannot be started by pressing the start button, then you need to turn off the power and restart, then check whether the inverter alarms. It is also necessary to check whether the intermediate relay is working normally and replace it if not.
        1. Check whether the U, V, W, and 380V voltages are normal. If all are normal, you need to replace the motor.
        2. The computer display does not display or the keys do not work:
        ① First check whether the switching power supply has DV 24V voltage output. Or the proximity switch is damaged and disconnected, causing the power indicator to be off, and there is no 24V output. ② Replace the proximity switch or switching power supply. ③ Replace the computer.
         3. The machine can start, but the feeding rubber roller does not turn and does not feed:
        ① Check if the servo driver has an alarm. If there is no alarm, replace the servo driver. ② Check whether the proximity switch is burnt out. If it is burnt out, replace the proximity switch. ③ Replace the servo motor.
        4. The machine starts working, but the feeding rubber roller feeds slowly or feeds for a long time:
        ① Mainly check whether the current value of the "pulse equivalent" parameter in the "modification" of the computer is "0.107".
         5. The rear unloading DC motor or conveyor motor does not rotate and does not work:
         ① Check if the overcurrent indicator in the upper left corner of the DC motor speed control board is on. If the overcurrent indicator is on, turn off the main power for 5 seconds before turning on the power. If the overcurrent indicator is still on, replace the DC motor speed control board. ② Check if the speed control potentiometer fails, if it fails, replace the potentiometer. ③ Check if the carbon brush of the DC motor is excessively worn, if it is worn out, replace the carbon brush.
         6. The punching machine does not punch or punch through:
        ① First check the parameter settings in the computer: Is the current value of "Punch Delay" 50 to 80 milliseconds, the current value of "Punch Delay" 30 milliseconds, and the current value of "Function 17" is 1 punch ". ② Check whether the punch is worn. ③ Check if the air pressure is above 0.6MPA. ④ Check whether the punched intermediate relay is working normally (replace). ⑤ Check whether the solenoid valve is damaged (replace).

        Paper bag machine equipment needs to be maintained and inspected in time after use. In use, it is necessary to pay attention to its use conditions, temperature requirements, and paper bag machine equipment needs to pay attention to the problem of deviation in the process of use. Now Xiaobian will introduce to you the common problems and reasons during the production of paper bag machine equipment.
        After the rapid development of the paper bag machine equipment in recent years, the equipment technology and the convenience of operation have been greatly improved, but there are still some issues that need attention, only when we are more familiar with the machine , We can better use the paper bag machine equipment for production, so that we will introduce several problems in the production process of kraft paper bag machine equipment.
        The production process of paper bags includes several steps such as feeding, production, and finishing, as well as related pre and post processes, such as cleaning, stacking, and disassembly. In addition, packaging also includes metering or stamping on packages. The use of mechanical packaging products can increase productivity, reduce labor intensity, meet the needs of large-scale production, and meet the requirements of cleanliness and hygiene.
       1. What is the reason why the shrinking machine heats up slowly or cannot rise to a higher temperature (above 160 degrees Celsius)?
        The circuit of the heater is that the main power line passes through a magnetic switch and then to the electric heating tube, so you should first check whether the contacts of the magnetic switch are normal. If the line does not pass through one of the phases, the above phenomenon will occur. If the magnetic switch is normal, check the meter again to see if the phase and the ohmic value of the machine are the same. If normal, it should be a short circuit. If all phases are connected but the line or electric heating tube is still abnormal, the heater needs to be replaced.
        2. How to adjust the film material when the equipment is easy to shift during normal operation?
        In the case of film deviation in the equipment, after adjusting the film roll position and the tension balance bar are invalid, the problem can be solved by adjusting the angle of the upper triangle plate. If the upper film material deviates from the clamping chain, the upper triangle plate can be adjusted clockwise; if the lower film material deviates from the clamping chain, the upper triangle plate can be adjusted counterclockwise.
        3. When packing 6 bottles, the electric eye cannot detect the package, and it is easy to cut the package when the machine is working. How to adjust it?
        The gap between the bottles of the cluster package will affect the detection of the electric eye. At this time, the horizontal electric eye detection angle can be adjusted to an oblique angle.
        We must be more familiar with these issues. Only in this way can our enterprise's production be stable.