High-speed slitting machine is a very popular device now, so it is very necessary to master the operation process of some high-speed slitting machines.
1. Set the cutting menu according to the film type, thickness, length, width, etc. arranged in the cutting plan.
2. File the corresponding BOPP film file from the PDF.
High-speed cutting machine
3. Set the winding length and width of the film of the corresponding specifications.
4. Select the corresponding winding station, adjust the roller arm and roller, and install the paper core of corresponding specifications.
After reading the above, I believe everyone already knows the operation process of the high-speed slitting machine.

        In the process of using the high-speed slitting machine, it is easy to cause failure if you are not careful, so you should keep these points in mind when using the high-speed slitting machine.
        The power supply of the machine must be safely grounded during use, and the personal safety of the operator must be ensured. The speed of the host must be adjusted to the lowest speed when starting up, and then when the blade is installed, it must be prevented from being scratched by the blade. After using for a period of time, the non-woven slitting machine needs regular maintenance on the place where the machine is lubricated. There is also the double-sided sharpening system configured by it. Attention should also be paid to its maintenance in order to maintain the long-term sharpness of the blade.
        All in all, whether it is installing or using a high-speed cutting machine, we must strictly follow the process.

        There are many slitting methods for slitting machines, each of which has its own characteristics. The following slitting machine manufacturers tell you what are the slitting methods?
        In the slitting process, it can be roughly divided into three methods: flat knife slitting, round knife slitting, and extrusion slitting.
        Flat knife slitting
        Just like a razor, a single-sided blade or a double-sided blade is fixed on a fixed knife holder, and the knife is dropped during the operation of the data, so that the knife cuts the material longitudinally to achieve the purpose of slitting.
        There are two methods for razor slitting:
        One is slitting and slitting; the other is dangling slitting.
        Grooving and slitting is when the data is running on the grooving roller, the cutter is dropped in the groove of the grooving roller, and the data is cut longitudinally. At this moment, the data has a certain wrap angle in the grooving roller, and it is not easy to have a drift appearance. When slitting cast PP film or film with narrow edge material, this kind of slitting method is often used to increase the slitting power. However, the shortcoming of dangling slitting is the inconvenience of knife comparison.
        Hanging slitting is when the data passes between the two rollers, the razor falls and cuts the data longitudinally. At this moment, the data is in a relatively unstable state, so the slitting accuracy is slightly worse than the die slitting, but this method of slitting Convenient tool setting and convenient operation.
        Flat cutter cutting is mainly suitable for cutting very thin plastic films and composite films.
        The above are the three slitting methods of slitting machine.

        At present, there are many types of slitting machines, but they are generally semi-automatic, so with the market demand, the future development must be toward fully automatic slitting machines. Why do you say that?
        1. Fully automatic and fast. Our manual operation often requires debugging, which invisibly reduces work efficiency. As a fully automatic operation, only one button is required to operate and the operation is accepted. This entire process can even be left unattended. If we compare now, I believe the speed is reliable.
        2. Simple operation, easy to learn and use. I do n’t know if people are lazy now or what is going on. Most people like simple things. The simpler the things, the easier it is to be accepted. Therefore, if the operation is simple, it will be a strong competitiveness. Did you say that?
        3. Machine operation is not easy to go wrong. As long as the machine has no clumsiness and mistakes, even if there is a problem, the machine will automatically stop working.

        Paper slitting machine is a very popular kind of slitting machine. The following editor will introduce the main features and defects of the paper slitting machine.
        The main feature of the slitter is that the magnetic powder clutch is installed as a resistance. After system control, a DC voltage is output to control the resistance generated by the magnetic powder clutch. The main advantage is that it is a passive installation that can control less tension.
        The main drawback is that the speed cannot be high, and high-speed friction of magnetic powder is easily formed during high-speed operation, which generates high temperature, which causes the magnetic powder clutch to generate heat and shorten its life. Use a knife to cut the roll of a certain width longitudinally and cut it into several narrower rolls for installation. After it is installed in the calender, extruder, glue applicator and other units, it can complete continuous strip cutting, often with winding installation. Strip cutter can be used flat knife and round knife.