In the process of using the computer paper cutter, sometimes "cutting knife" failure occurs, which seriously affects the normal work of the paper cutter. If you want to fundamentally eliminate this failure, you must start with improving the structure of the cutting system of the computer cutter. This is not something that ordinary users can do. For ordinary users, you want to eliminate or reduce " The occurrence of "cutting knife" failure should pay attention to the following aspects:
1. Sharpen the blade in time to keep the blade sharp. In addition, when not necessary, try not to use blades with large corners, which can effectively reduce the paper's resistance to cutting.
2. Pay attention to the change of the slideway clearance. When the phenomenon of "cutting out" tends to be obvious, the change of the slideway clearance should be checked first. Under normal circumstances, the gap should not exceed 0.1 mm. The sliding surface bears a large load during the cutting process, coupled with poor lubrication conditions, and is constantly worn during use, which causes the gap to increase, resulting in a "cutting knife" failure. When it is confirmed that the gap exceeds the allowable value, it should be adjusted in time.
3. Careful maintenance to ensure good lubrication of the slide surface.
As the name implies, a hydraulic paper cutter is a paper cutter with a hydraulic device inside. It can cut very thick documents. It is mainly composed of a host, a workbench, a paper pushing mechanism and cutting. The hydraulic paper cutter can accurately ensure the consistency of the length and width after cutting, and has controllability.
What is the difference between a hydraulic paper cutter and an electric paper cutter? There is hydraulic oil inside the hydraulic paper cutter, which is operated by a hydraulic device. When cutting soft paper, sometimes it will be opaque and not suitable for cutting small batches of documents. The hydraulic paper cutter can cut a variety of materials such as leather, rice paper, kraft paper, etc. The speed is very fast, suitable for use in libraries and publishing houses.
The electric paper cutter is purely mechanically controlled, and the paper cutting is convenient for text cutting in small batches.
When using a hydraulic paper cutter, you should pay attention to the ground wire. You should always add oil to the bottom of the paper push bar. Regularly check the gap between the screw nut and the paper pusher. Check the encoder and hydraulic oil regularly. Please follow the instructions The requirements of adding hydraulic oil.
At present, in terms of paper cutters, many forms also appear on the market, such as computer paper cutters, etc., but in terms of CNC, digital display, and program-controlled paper cutters, many people are not very familiar with it, or It is easy to confuse them, so before comparing them, we must first introduce their respective concepts.
For the program-controlled paper cutter, it uses the single chip microcomputer or EDA technology as its tool. The computer can automatically complete the logic compilation, simplification, segmentation, synthesis, optimization, layout, wiring, and simulation steps to complete the entire A paper cutter with automatic control during operation.
The numerical control technology refers to a technology that uses some commands composed of numbers, words and symbols to control the actions of multiple mechanical devices. It generally uses some general-purpose or special-purpose computers to control its numbers. Program control. Digital display is a way to display the test results of temperature, humidity, quality, etc. in digital form.
Paper cutter is the crystallization of our 21st century science and technology. It is used to deal with the demand for paper products in the late printing industry. From the development of the mechanical paper cutter with weak technology to the practical and beautiful program-controlled paper cutter, the cutting time of our paper products is shortened, the accuracy is improved and the labor cost is reduced, and the operation is safer.
While we enjoy the convenience brought by technology, we have encountered many problems. Recently, the editor discovered that the tie rod of the cutter bed of the program-controlled paper cutter is securely cracked. What is the reason?
Originally, the upper and lower movements of the cutter of the paper cutter were completed by the touch of the tie rod. In order to protect the safety of the machine, this tie rod is equipped with a stable pin. This stable pin is a stable device for the layout of cast iron. When the cutting resistance is too large, it is safe. The pin will crack, and the cutter will stop working, which can effectively ensure that we will not be injured accidentally when operating the machine.
It is very troublesome to stop and replace the new stable sales. It is recommended that when the wood is cut from the product, it is necessary to pay attention to the height of each stack of paper is the same, and do not close to the right wall board to avoid cracking of the stable sales.
The development momentum of the paper cutter industry in recent years can be described as very violent, especially in the current market of survival of the fittest. The competition between various manufacturers has evolved into competition in the market, from the initial equipment room paper cutter, to the electric paper cutter, to the current digital display paper cutter, it can be described as very fierce.
In the development of the printing industry in recent years, the market for the development of paper cutters is very broad. Therefore, in the competition, paper cutter manufacturers want to save first in this vortex, and only continue to develop new Products, new technologies, and reasonable use of resources to create high-quality products can only have a place in the market.
In addition, the development direction of the paper cutter industry depends largely on the printing industry and the packaging industry. This is mainly because the paper cutter is an indispensable device in the packaging industry and the brush industry. According to the existing market, the development of paper cutters is no longer as simple as paper cutting. It needs to integrate various functions, such as high intelligence and high precision, which can effectively improve work efficiency and save resources. Only in this way can the development of the paper cutter industry have more advantages.